How To Finish Unfinished Kitchen Cabinets

A complete paint job usually requires a coat of primer and two coats of the finish paint.

How to finish unfinished kitchen cabinets. Sand recesses with flexible sanding block or bend sandpaper around a large dowel. They are still considered unfinished cabinets until you apply a finish. With that said a little prep work and diligence can still yield a nice set of cabinets for half the price.

Most unfinished oak kitchen cabinet sets will typically start around 1000 and up depending on the measurement of your kitchen. The bright light from the window makes it difficult to see but the trim around the edge of the cabinet comes down a little further than the frame so the blocks are kind of hidden up there. Use an ultra-fine sand paper I love these sanding sponges Amazon link and give the entire surface a light sanding.

Unfinished stock cabinets are usually the best buy when you are upgrading your kitchen. You might need to lightly sand and prepare the surface before applying your first coat of stain or paint. This seems a bit silly but it is so important.

However one more light sand with a fine sandpaper at least 200 grit although 400 grit is even better will help you get a silky-smooth finish. Apply two coats of finishing spray. How to Finish Unfinished Cabinets The Ingredients.

I secured each block to the frame of the cabinet with two screws. Below are several solutions that may be used on both framed and frameless cabinets. Next re-apply and paint cabinets again with another generous coating of paint.

When you purchase your incomplete cupboards you will undoubtedly purchase either birch or oak. If priming unfinished kitchen cabinets with a latex primer sand the dried primer lightly with 220-grit sandpaper. Free up the space.